The dethatcher has a universal mount. It bolted to the mule drive on our Cub Cadet.
The spacing between the two mounting brackets is adjustable to make it a more universal mount.
I had to add a lift system so that the dethatcher could be raised for crossing gravel or maneuvering.
The added lift system required that I make a bracket to bolt to the side of the tractor. I modeled the bracket after the one on the Jiffy Balling mower.
There was an angle iron bolted to the top of the dethatcher that looked like it was made for lifting. I connected my cable to it.
The other end of the cable was connected to the tractor’s hydraulic lift. I had to add a “snatch block” to clear the hydraulic pump.